AEMC®Instruments

Model 24-3001 [Cat. 2120.81] (300/3000A, 24″, 10mV/A / 1mV/A)
space
space
Model 24-3001 [Cat. No. 2120.81] (300/3000A, 24", 10mV/A / 1mV/A)
Characteristics:
  • 24″ flexible sensor fits around conductors up to 7.6″ in diameter
  • Dual measurement ranges of 300A and 3000AAC
  • Read amperage directly on DMM display
  • mV output directly proportional to the AC current measured
  • Output is 10mV/A on 300A range and 1V/A on 3000A range
  • Accuracy of 1% of Reading ± 500mA
  • 4% influence of conductor position in jaw
  • Up to 300 hours battery life
  • Dual banana plug termination for direct input into DMMs
  • EN 61010, 1000V, Cat. III, Pollution Degree 2
  • Flashing LED low battery indicator
Applications:
  • Motor testing and troubleshooting
  • Load monitoring
  • HVAC troubleshooting
  • Power analysis
  • Transformer testing
  • Substation testing
Product Description:
space
space The FlexProbe® Model 24-3001 is a low cost AC current measurement probe designed to plug into digital multimeters, oscilloscopes and power recorders. The Model 24-3001 is composed of a flexible sensor and an electronic module with a 14″ double insulated cable. The flexible sensor is designed to fit around large or small conductors and is capable of getting into tight or difficult spaces. It is ideal for measuring AC current in a group of conductors.
space
Specifications:
space
24-3001
ELECTRICAL
Current Range 300/3000
Measurement Range 5 to 300A / 300 to 3000A
Output Signal(s) mV output (4000mV peak max)
Three Position Slide
Switch		 10mV/A 5A to 300Arms
1mV/A 50A to 3000Arms
ON/OFF NA
Accuracy 1% of Reading ± 500mA
Crest Factor 4.5
Phase Shift <0.7° at 50 or 60Hz
Frequency Range 40 to 5kHz
Working Voltage 1000Vrms max (Cat. III)
Common ModeVoltage 600Vrms max
Power Source 9V Alkaline (NEDA 1604A, IEC 6LR61)
Battery Life 150 hours typical (continuous use)300 hours with Lithium battery
MECHANICAL
Dimensions 4.9 x 2.5 x 1.1″ (124 x 64 x 28mm)
Weight 1.1 lb (0.5kg)
Maximum Conductor 7.6″ (193mm)
Sensor Length 24″ ± 1″ (610mm ± 25.4mm)
Cable Length 6.5 ft (2m)
Output Double insulated
14″ (36cm) lead withsafety banana plugs
ENVIRONMENTAL
Operating Temperature 14° to 131°F (-10° to 55°C)
Storage Temperature -40° to 158°F (-40° to 70°C)
Operating RelativeHumidity 50° to 86°F (10° to 30°C) (non-condensing)104° to 122°F (40° to 50°C) (non-condensing)
SAFETY
Rating EN 61010, 1000V, Cat. III, Pollution Degree: 2
pdf_pic Downloads: Specifications
base
weblink
The FlexProbe® Model 24-3001 series are low cost AC current
measurement probes designed to
plug into digital multimeters,
oscilloscopes, and power recorders.
The Model 24-3001 is composed of a
flexible sensor and an electronic
module with a 14″ double insulated
cable.

The flexible sensors
are designed to fit around large or
small conductors and are capable of
getting into tight or difficult places.
They are ideal for measuring AC
current in a group of conductors.

 

 

 

 

 

 

 

 

 

 

 

 

 

index mail web