Conax Technolgies
Compression Seals
Conax is more than a firmly established, successful company that designs and manufactures products. We’re people—a team of problem-solvers. From engineering customized solutions to manufacturing quality parts, we work together to meet all of your challenges.
We are your one fully integrated source for solutions that require compression seal fittings, temperature sensors, and custom-designed solutions.
Conax is proud to be in a class by ourselves with over 1,000,000 catalogued parts. So, you can order one single part or 100,000 units. You DO benefit from our dedication to quality and prompt delivery.
Single Element Fittings Conax Technologies Model PG Packing Glands provide pressure/vacuum sealing for tubes, probes, pipe, cable or any single element assembly (not electrically isolating), including thermocouples, RTDs, thermometers, thermistor probes, capillary tubes, tubewells, multi-pair cables and analyzer sample tubes. PG glands seal against gases and liquids and resist element movement under pressure.  Conax Technologies Model MK Midlock Fittings (sealing glands) seal a single tube or probe. Featuring a metal-to-metal seal rather than our standard soft sealant technology, MK fittings are used where a joint must be opened and resealed in the same setting. Their unique design forms the seal well within the body housing to provide superior performance in high vibration applications. 
Like the EGT Feedthrough, Conax Technologies HEGPK Feedthroughs electrically and/or thermally isolate single electrodes, tubes or temperature sensors for use in vacuum furnaces, liquid level probes, transformers, environmental chambers, power leads and more. These bare electrical feedthroughs also seal against gases and liquids and resist electrode (also known as conductor) movement under pressure. 
 Conax Technologies offers three models of split fittings (glands) designed to facilitate assembly and sealant replacement when the diameter of the probe tip is larger than the diameter of the element(s) at the location of the seal. Split fittings provide split sealants, followers and seats to facilitate easy sealant change without removing the element(s) from the system.  When your requirement calls for sealing on jacketed cables, Conax Technologies’ PG Double Sealant Fitting is the ideal solution. Our PG fitting is modified to accept standard PG sealants inserted into the fitting back-to-back and compressed with a shortened.  The Conax Technologies’ Sample Probe Assembly (SPA) is used to insert and retract an analyzer sample probe or injection quill into a pressurized process through a process isolation valve. A quote request form must be filled out to receive a quote, please use the below link to download the form.
 • High Density (HD) assemblies consist of a stainless steel tube swaged over 12, 24, 40 or 60 bundled PTFE coated thermocouple grade and/or copper wires, providing a continuous wire feedthrough for thermocouples, RTDs or low voltage instrumentation. No epoxy or potting is used in the construction. The assembly can be furnished with or without junctions and comes standard with 24 inches of leadwire on each end. Longer wire lengths can be supplied as required.  • Conax Technologies manufactures high pressure seals up to 30,000 psig at 68° F (20° C) for instrument signal wires. High pressure seals are designed for installation onto the pressure vessel wall using threaded mounting configurations only. High pressure assemblies are factory torqued, so disassembly and reassembly in the field is not recommended.  • High Density (HD) assemblies consist of a stainless steel tube swaged over 12, 24, 40 or 60 bundled PTFE coated thermocouple grade and/or copper wires, providing a continuous wire feedthrough for thermocouples, RTDs or low voltage instrumentation. No epoxy or potting is used in the construction. The assembly can be furnished with or without junctions and comes standard with 24 inches of leadwire on each end. Longer wire lengths can be supplied as required. • TG assemblies with high-temperature fiberglass-insulated thermocouple wire are specially designed for applications where the sensor wire is exposed to process temperatures reaching up to 1400°F (760°C). This assembly is particularly targeted for use with vacuum and/or inert gas back-filled furnaces with vessel wall temperatures up to 200°F (93.3°C) and pressures not exceeding 300 psi. • This assembly consists of a Conax Technologies manufactured TG Feedthrough provided with a sealant and 24 AWG solid insulated thermocouple grade wires or copper wires. The feedthrough is furnished with 24″ of wire on each side. Longer wire lengths can be furnished as required.  • Transformer and motor power, conduit box feedthroughs, pressure and vacuum chamber power and instrument feedthroughs, etc.  • Conax Technologies’ HL Feedthrough is designed for sealing protection in a wide variety of hazardous environments. The HL Feedthrough has been CSA® certified in the U.S. and Canada for use in hazardous locations defined by the NEC® as Class I, Div.1 and 2, Groups B, C, and D; Class II, Div. 1 and 2, Groups E, F, and G; and Class III.  • Continuous Wire Feedthrough for Embedded Bearing Temperature Sensors while sealing securely to prevent oil wicking along the leads. Conax Technologies BEARING SENSOR WIRE SEAL efficiently seals directly on the individual insulated leads of an embedded bearing temperature sensor exiting an oil-filled bearing housing. 
Conax Technologies’ HL Feedthrough is designed for sealing protection in a wide variety of hazardous environments. The HL Feedthrough has been CSA® certified in the U.S. and Canada for use in hazardous locations defined by the NEC® as Class I, Div.1 and 2, Groups B, C, and D; Class II, Div. 1 and 2, Groups E, F, and G; and Class III. Application-Specific Fittings Conax has a variety of High Performance fittings to suit your application needs. Whether you need high density, temperature, or temperature, Conax has the solution.
|
|||
