• Megger

Megger® DET3TD

LCD Analog Display Ground Testers

Megger DET3TD


  • IP54 rated
  • LCD display with Analog arc for trend viewing
  • 2 and 3 point testing
  • Selectable 25 V or 50 V output
  • Complete with lead and stake kit
  • Simple one button operation
  • Hardwearing carry case
  • Delivered with calibration certificate
  • Simple one button operation


The new ground testing instrument family from Megger offers a unique solution to your ground rod testing needs. The complete kit of instrument, test leads, stakes and batteries are delivered in a tough polypropylene carry case – everything you need to start testing in one kit.

The ground tester is rated to IP54 making it truly an outdoor instrument. The ground tester has been designed to be easy to use – a large selector switch makes selection of 2 and 3 pole test easy with gloved hands – and the design makes the fitting of shorting links to perform 2 pole tests a thing of the past. A large, clear, easy to read analog display and thumb sized test button again makes the instrument particularly suited to the outdoor conditions of ground testing.

In addition to this ease of use, the ground tester also allows you to check the connection and condition of the P and C spike, indicating the status on the instrument. The instrument also includes a voltmeter to allow you to measure the ground voltage. The ground tester can measure resistance from 0.01 ohm through to 2000 ohms and earth voltages up to 100 V. To allow testing in noisy environments the instrument is capable of rejecting noise of up to 40 V peak to peak.

IIII [+] Read More

The Megger digital ground tester is powered by eight AA batteries which are widely available and also give excellent testing time – the status of these batteries is given bya bar graph on the LCD display allowing yo to decide when to change the batteries, before they expire.

The Megger ground testers are designed to meet stringnet safety standards and are rated CAT IV 100 V.

  • Literature
  • Specifications
pdf icon Description
++ DET3TD Specification sheet
Ingress protection: IP54
C spike check: Automatic
P spike check: By pushbutton
Noise check::

By selector switch

Noise rejection: 40 V pk to pk
2-wire test: Yes
3-wire test: Yes
No disconnect testing (ART): Yes, with optional ICLAMP
Earth current range with ICLAMP: 0.5 mA to 19.9 A
Earth current accuracy: 5% ±3 digits
Resistance range: 0.01 to 2000 Ω
Resistance Accuracy: 2.5% of scale length
Earth voltage range: 0 – 100 V a.c.
Earth voltage accuracy: 2.5% of scale length
Display: LCD
Battery type: 8 off AA cells
Operating temperature range: -20 to +50ºC
Storage temperature range: -40 to +70ºC
EN61010-1 CAT IV
100 VEN61557-1


203 x 148 x 78 mm (8 x 5.7 x 3.2 inches)
Weight: 1 kg