Conax BSWS Series – Bearing Sensor Wire Compression Seal Feedthrough
- Stainless Steel Fitting
- For Bearing Oil Sealing
- Easy Installation – No “Potting”
- Seals 2 to 14 Wires
- Pressure*: to 50 PSI (3.4 bar)
- Temperature Range: Ambient to 100°F (37.8°C)
- Field Adjustable
- Reusable Fitting
Conax EG Series – Power Compression Seal Feedthrough
- Seals 1 Electrode or Element
- For Gas or Non-Conductive Liquid
- Stainless Steel Reusable Fitting
- “Soft Sealant”
- Electrode Easily Assembled or Replaced in Field
Conax EGT Series – Power Compression Seal Feedthrough
- Electrode Teflon Sealing Gland
- Seals 1 Electrode or Element
- For Gas or Non-Conductive Liquid
- Stainless Steel Reusable Fitting
Conax FCA Series – Fiber Cable Assembly
- Transmission Loss: Less than 0.3db typical (not including connectors).
- Temperature Rating: -4°F to +185°F (-20°C to +85°C). Higher temperature models are available in some configurations. Please consult factory.
Conax FSA Series – Fiber Optic Feedthrough
- Helium Leak Rate: 1 x 10-6 scc/sec typical
- Transmission Loss: Less than 0.3db typical (not including connectors)
- Pressure Rating: 1000 PSIg (70 bar) standard, up to 3000 (207 bar) PSIg optional
- Temperature Rating: -4°F to +185°F (-20°C to +85°C). Higher temperature models are available in some configurations. Please consult factory.
Conax HD Series – High Density Feedthrough Assemblies
- Sheath Material: 300 Series SST, 4.5″ nominal length
- Temperature Range: -112°F to +250°F (-80°C to +120°C)
- Vacuum Rating: 5 x 10-6 mm HG @ 68°F (20°C)
- Leak Rate: 1 x 10-9 scc/sec He @ 68°F (20°C), 1 atm. applied
- Voltage Rating: 100 VDC
- Amperage Rating: 500mA
- Feedthrough Pressure Rating @ 68°F (20°C): 5000 psi (345 bar)
Conax HEGPK Series – Power Compressions Seal Feedthrough
- Seals one electrode, conductor or element
- Temperature Range: Vacuum to 7,700 PSIg (531 bar)
- Voltage 8000 VDC
- Amperage to 200 amps
- Supplied with or without conductor
Conax HL Series – Hazardous Location Conduit Seal
- Stainless Steel Fitting
- For Gas or Liquid
- Easy Installation -No “Potting”
- Seals 1 to 12 Wires
- Pressure*: Vacuum to 10,000 PSI (690 bar)
- Rated: 600 Volts to 55 Amps
Conax HPEG Series – Power Compressions Seal Feedthrough
- Each unit has a stepped electrode. Larger diameter of electrode is on the body side.
- Electrode is copper (CU), stainless steel (SS) and nickel (NI)
- Voltage rating 2000VDC
- Body material is 316SS, ASTM 479
- SST nuts and washers for NI and SS, brass for CU
- All prices include a pressure test at 68°F
Conax MHC Series – Multi-hole Ceramic Compression Seal Fitting
- Seals 1 to 16 Elements
- For Gas or Liquid
- Stainless Steel Fitting
- *Soft Sealant
Conax MHM Series – Multi-hole Metal Compression Seal Fitting
- Seals 1 to 16 Elements
- For Gas or Liquid
- Stainless Steel Fitting
- *Soft Sealant