Showing all 10 results

Conax HD Series – High Density Feedthrough Assemblies

  • Sheath Material: 300 Series SST, 4.5″ nominal length
  • Temperature Range: -112°F to +250°F (-80°C to +120°C)
  • Vacuum Rating: 5 x 10-6 mm HG @ 68°F (20°C)
  • Leak Rate: 1 x 10-9 scc/sec He @ 68°F (20°C), 1 atm. applied
  • Voltage Rating: 100 VDC
  • Amperage Rating: 500mA
  • Feedthrough Pressure Rating @ 68°F (20°C): 5000 psi (345 bar)

Conax HL Series – Hazardous Location Conduit Seal

  • Stainless Steel Fitting
  • For Gas or Liquid
  • Easy Installation -No “Potting”
  • Seals 1 to 12 Wires
  • Pressure*: Vacuum to 10,000 PSI (690 bar)
  • Rated: 600 Volts to 55 Amps

Conax HPEG Series – Power Compressions Seal Feedthrough

  • Each unit has a stepped electrode. Larger diameter of electrode is on the body side.
  • Electrode is copper (CU), stainless steel (SS) and nickel (NI)
  • Voltage rating 2000VDC
  • Body material is 316SS, ASTM 479
  • SST nuts and washers for NI and SS, brass for CU
  • All prices include a pressure test at 68°F

Conax PGS Series – Split Compression Seal Fitting

  • Seals 1 Element
  • For Gas or Liquid
  • Stainless Steel Fitting
  • Simple Assembly – Insert Element, Torque Cap
  • Replaceable Sealant Permits Repeated Use Of Fitting

Conax PL Series – Multi-Wire Power Compression Seal Feedthrough

  • Stainless Steel Fitting
  • For Gas or Liquid
  • Easy Installation -No “Potting”
  • Seals 1 to 12 Wires
  • Pressure*: Vacuum to 10,000 PSI (690 bar)
  • Rated: 600 Volts to 55 Amps

Conax SPG/DSPG Series – Multi-hole Split Compression Seal Fitting

  • SPG Seals 1 To 11 Elements DSPG Seals Up to 17 Elements
  • For Gas or Liquid
  • Stainless Steel Fitting
  • Soft Sealant

Conax TG-24/MTG-24 Series – Instrumentation Wire Compression Seal Feedthrough

This assembly consists of a Conax Technologies manufactured TG Feedthrough provided with a sealant and 24 AWG solid insulated thermocouple grade wires or copper wires. The feedthrough is furnished with 24″ of wire on each side. Longer wire lengths can be furnished as required.

Conax TGF/MTGF Series – High Temperature Wire Compression Seal Feedthrough

TG assemblies with fiberglass-insulated thermocouple wire are specially designed for applications where the sensor wire is exposed to process temperatures reaching up to 900°F (482°C). This assembly is particularly targeted for use with vacuum and/or inert gas back-filled furnaces with vessel wall temperatures up to 200°F (93.3°C) and pressures not exceeding 300 psi.

Conax TGM/MTGM Series – High Temperature Wire Compression Seal Feedthrough

TG assemblies with high-temperature fiberglass-insulated thermocouple wire are specially designed for applications where the sensor wire is exposed to process temperatures reaching up to 1400°F (760°C). This assembly is particularly targeted for use with vacuum and/or inert gas back-filled furnaces with vessel wall temperatures up to 200°F (93.3°C) and pressures not exceeding 300 psi.