Large Display Clocks & Timers
Clocks, counters, timers and process indicators available. Connects to master clocks, PLCs, computers, and control switches. 1 – 12 inch display options with 2- 6 digits available.
Description
Related products
CC Series
The CC Series System Clocks provide an economical solution for any size clock system. They are easily corrected by master clock systems. In addition, all CC Series System Clocks can receive serial data input from computers or other controllers. Up to 50 clocks can be connected to a standard RS232 Port at distances of up to 2000 feet away. Signal drivers are available for adding additional clocks and greater distances.
AE12X Series
Twelve Inch High, Super Bright Red, Dot Segment LED Digits, visible up to 500 feet away. Models include four- or six-digit clocks, timers, counters, process indicators, RS232 displays, and production monitors. Also available are: two, three, and five-digit models
MC Series
The MC Series Master Clocks are available in various configurations depending on the type of enclosure and the number of relay outputs required. All have the same powerful operating program which provides up to 100 events per day, Annual Programming and keyboard selectable, secondary clock correction. Correction for most analog and digital secondary clocks, including three-wire synchronous, minute impulse, bi-polar minute impulse and all Midnight synchronized digital clocks, is built-in. An RS232 Output driver comes standard in the MC4181NX, MC4181LV, and MC41P models for driving ATS AE and CC Series Large Digital clocks with the RS232 input.
AE8X Series
Eight Inch High, Super Bright Red, Dot Segment LED Digits, visible up to 400 feet away. Models include four- or six-digit clocks, timers, counters, process indicators, RS232 displays, and production monitors. Also available are: two, three, and five-digit models.
AE1X Series
One Inch High, Bright Red LED Digits, visible up to 50 feet away. Models include four- or six-digit clocks, timers, counters, process indicators, RS232 displays, and production monitors
STD Series
Measure and display accurate Elapsed Time with the STD Series Precision Timer. Interchanges with standard electric time models, and no panel modification required. The STD-11-2 displays 0.000 to 9999.999 seconds; while the STD-525T displays in minutes, seconds, tenths of seconds, and hundredths of seconds.
AE2X Series
2.3-Inch-High, Bright Red LED Digits, visible up to 110 feet away. Models include four- or six-digit clocks, timers, counters, process indicators, RS232 displays, and production monitors.
AE4X Series
Four Inch High, Super Bright Red, Dot or Bar Segment LED Digits, visible up to 200 feet away. Models include four- or six-digit clocks, timers, counters, process indicators, RS232 displays, and production monitors. Also available are: two, three, and five-digit models.