- 1U Half-rack, high power density
- Bidirectional energy flow
- High efficient power regeneration
- Battery test
- Battery simulation
- Independent control of multi-channels with functions of synchronization and proportional tracking
- Up to 16 units can be paralleled connected
- High speed measurement, 10 times/S updating rate
- CC/CV priority
- Adjustable output impedance
- Programmable voltage and current rise and fall time
- Temperature measurement function, over temperature protection
- Various protection such as OCP / UCP / OVP / OTP / OPP / UVP, over heat protection, grid fault protection and fault storage, foldback, Power-off protection, sense abnormal protection
- Automatic detection of power grid state to realize reliable grid connection
- Pre charge function to prevent overshoot of DC loading current
- Anti-reverse protection function through optional accessories
- Five optional cards, supporting RS232, CAN, LAN, GPIB, USB_TMC, USB_VCP, RS485, analog and IO communication
ITECH IT-M3400 Series – Bidirectional DC Power Supplies
IT-M3400 bidirectional DC power supply integrates the features of a bidirectional dc power supply and a regenerative electronic load. It keeps the advantages of high power density and modular architecture design of M series. It can meet the customer’s test requirement of different current and power level. Thanks to the independent multi-channel design, users can configure each channel according to the quantity and specifications of the DUT. At the same time, it has high-precision output and measurement, and has made a number of safety designs for testing, suitable for multiple test fields, such as power modules, intelligent industrial equipment, automotive electronics, charging and discharging tests of various small capacity batteries.
Description
Additional information
| Brand | ITECH |
|---|
Related products
APM SP 1U Series – Programmable DC Power Supply
APM’s SP Series 1U programmable DC power supplies have many features including: high precision and resolution, 0.05 % voltage accuracy, 0.1 % current accuracy, 0.1 mV voltage resolution, 0.2 mA current resolution, high efficiency, low ripple and noise, and multiple communication interfaces, which allows for a more flexible and easy-to-use power supply.
Preen AFC Series – AC Power Sources
- Single phase power output from 0.5-150kVA and three-phase power output from 6-2000kVA
- CE mark with high electromagnetic compatibility performance
- High input power factory and high efficiency up to 92%
- Coupled with 4 LED displays to show measurements of voltage, current, frequency and power at once
ITECH IT6100 Series – Programmable DC Power Supplies
IT6100 series assure you accurate measurements with 0.1mV/0.1mA high resolution and high accuracy. With high-speed List mode output and voltage rise speed up to 20ms, it can independently edit and perform the default voltage waveform to meet the high-speed test needs. IT6100 series has built-in 5 1/2 digital voltmeter and milliohm meter, which can measure additional signals. IT6100 series supports SCPI communication protocol, GPIB/USB/RS232 interfaces are optional for customers.
ITECH IT6800 Series – Programmable DC Power Supplies
IT6800 series programmable power supplies (18V-150V / 72W-216W) are small in size but have high power output, and 10mV, 10mA resolution, supports RS232 / GPIB / USB communication interface.
Buy Online
ITECH IT6700 Series – Economical DC Power Supplies
IT6700 series economical power supplies have the widest voltage and current utilizations. One power supply can replace multiple other power supplies and be widely used in various testing situations. With a capacity of 100W, voltage output of 60V, current output of 5A, they can control voltage and current change rates automatically. The power ratio can be up to 3 times. For instance, one IT6720 with up to 60 V and 5 A can substitute several previous models, allowing cost savings over the cost of multiple units.
Buy Online
ITECH IT6500 Series – Wide-Range High-Power DC Power Supplies
With ITECH’s latest technology, the IT6500 series offers a full-featured high-performance power test solution. With fast response these DC power supplies provide users with a new level of power supply performance. From 800W to 30 kW, the whole series include more than 100 models. The maximum output voltage and current is up to 1000V and 1200A respectively. With its autoranging capability, it also has a super wide range of voltage and current applications. Users can choose the power supply that fits their testing requirements perfectly.
Buy Online
ITECH IT7600 Series – High Performance Programmable AC Power Supplies
ITECH's IT7600 series high performance programmable AC power supplies, adopt advanced digital signal processing technology, with frequency up to 10-5000 Hz, built-in all-round power meter and large-screen oscilloscope function. Power up to 54 kVA and support master-slave parallel, which can provide high-capacity single-phase or three-phase AC output. The IT7600 has built-in arbitrary waveform generator functionality to simulate a variety of arbitrary waveform outputs; as well as strong exchange measurement and analysis functions.
Buy Online
ITECH IT6000D Series – High Power Programmable DC Power Supplies
IT6000D Series has wide range of applications and a single unit provides power range of 5kW to 144kW, current up to 2040A, as well as voltage up to 2250V. IT6000D also provides multi built-in communication interfaces to simplify and accelerate the testing development. The compact 3U design saves rack space. Multi units of the same model can be paralleled easily to have higher power and the maximum power can reach up to 1.152 MW.