- Output according to voltage and current programmed
- Output Timer(0.1 ~ 99999.9S) Function
- Lower noise and ripple
- Remote sense function
- OVP/OCP/OTP protection functions
- Rich SCPI instructions to facilitate the formation of intelligent test platform
- Optional external analog function
- VFD Display
- Adjust voltage and current via knob or numerical key pad
- High Accuracy & High Resolution
- Adjust digital step value via cursor
- Intelligent fan control
- Supports front & rear panel outputs
ITECH IT6900 Series – Wide-Range Programmable DC Power Supplies
IT6900A series wide range programmable power supply have built-in standard RS232, USB, GPIB, RS485 and analog interface, support SCPI protocol, facilitate remote control, industrial PLC control and the formation of intelligent test platform. Remote compensation terminals avoid the problem of inaccurate testing caused by voltage drop on the wire. Low ripple, low noise and built-in digital voltmeter make IT6900A easy to do external measurement. IT6900A can be widely applied in DC-DC power supply module, battery charging and sensors and other test areas.
Categories: DC Power Supplies, Power Supplies
Description
Additional information
Brand | ITECH |
---|
Related products
Rigol DP700 Series – Entry Level Linear DC Power Supplies
- 1 Channel
- 150 W models in 50 V / 3 A or 30 V / 5 A configurations
- Low ripple and noise: <500 μVrms/3 mVpp; <2 mArms
ITECH IT6000D Series – High Power Programmable DC Power Supplies
IT6000D Series has wide range of applications and a single unit provides power range of 5kW to 144kW, current up to 2040A, as well as voltage up to 2250V. IT6000D also provides multi built-in communication interfaces to simplify and accelerate the testing development. The compact 3U design saves rack space. Multi units of the same model can be paralleled easily to have higher power and the maximum power can reach up to 1.152 MW.
Preen PFV Series – AC Power Sources
- Regenerative function can sink the energy from load and return to the grid
- Three-phase independent control to set voltage of each phase
- Phase angle control to set angle between each phase
ITECH IT6800 Series – Programmable DC Power Supplies
IT6800 series programmable power supplies (18V-150V / 72W-216W) are small in size but have high power output, and 10mV, 10mA resolution, supports RS232 / GPIB / USB communication interface.
Buy Online
ITECH IT6100 Series – Programmable DC Power Supplies
IT6100 series assure you accurate measurements with 0.1mV/0.1mA high resolution and high accuracy. With high-speed List mode output and voltage rise speed up to 20ms, it can independently edit and perform the default voltage waveform to meet the high-speed test needs. IT6100 series has built-in 5 1/2 digital voltmeter and milliohm meter, which can measure additional signals. IT6100 series supports SCPI communication protocol, GPIB/USB/RS232 interfaces are optional for customers.
Preen ADC Series – DC Power Supplies
- O/P Power: 2-64kW
- O/P Voltage: 0-600V, max output voltage is 30V-600V
- High power density: 2kW and 4kW models are 2U, and 8kW model is only 4U
- Three 19-inch cabinet available (18U、32U、42U)
Preen AFV/APF Series – AC Power Sources
- Single phase output power from 0.5-20kVA and three phase output power from 10-2000kVA.
- CE mark with high electromagnetic compatibility performance.
- Programming Sequence Function: STEP and GRADUAL modes allow users to easily set sequences of start/ end voltage, frequency and run time for testing purposes.
APM SP 2U Series – Programmable DC Power Supply
APM’s SP Series 2U programmable DC power supplies have many features including: high precision and resolution, 0.05 % voltage accuracy, 0.1 % current accuracy, 0.1 mV voltage resolution, 0.2 mA current resolution, high efficiency, low ripple and noise, and multiple communication interfaces, which allows for a more flexible and easy-to-use power supply.