Pre-installed, pre-wired and pre-configured power meter are tested for quality before shipment. The pre-configured panel comes ready to use in a durable and watertight NEMA 4 panel which provides the added convenience and reliability over traditional end-user installations.
AcuPanel 9100 Series – Pre-Wired Meters in Enclosure
- Factory pre-wired for fast, reliable install
- Factory pre-configuration eliminates meter programming on-site
- Required accessory components all pre-installed
- Self-powered panel does not require separate power supply
- Durable enclosures provide high tolerance for external force with well protection
Related products
AcuCT mV – Split Core Current Transformers
- Conventional 333 mV split-core CT
- Safe mV secondary output
- 0.5% accuracy from 10-120% of rated current
- 20A – 5000A AC current input range
- UL recognized
Accuenergy DC Current Shunts
- 0.5% accuracy
- 50A to 6000A measurement range
- 75mV rated voltage output
Rogowski Integrator Kit – V
- 0-5Vdc or 0-10Vdc rated output that works with any energy meter or device
- Measurement Channels: Three-phase or single-phase
- Works in both 50Hz and 60Hz systems
EV300 Series – Economy Multifunction Power Meter
- Utility Revenue Grade Accuracy IEC 62053-22 0.5s Class / ANSI C12.20 0.5 Class
- Bi-directional Energy Metering
- Utility Revenue Grade Accuracy
- Field Configurable 5A/1A CT Input
- RS485 port Built-in with Modbus-RTU
- Standard Panel Mount 96mm DIN- Direct Retrofit
- Switch Status Monitoring and Controlling
- Energy Pulse Output
- 4-20mA Analog Transducer Output
- Over/Under Limit Alarm-triggered Relay Output
- Lowest Cost in the Same Class Guaranteed
AcuCT 5A – Split Core Current Transformers
- 0.5% accuracy from 10%-120% of rated current
- 100A to 6000A measurement range
- Industrial standard 5A secondary output
- Optional 1A output
- Accessory kits included for mounting in multiple locations
- UL recognized
Acurev 1310 Series – Utility Revenue Grade Accuracy
- Utility Revenue Grade Accuracy – IEC 62053-22 0.5s Class / ANSI C12.20 0.5 Class
- Multiple CT Input Options compatible with any CT: 5A/1A, 333mV, Flexible Rogowski Coil, 80/100/200mA
- 4 Channel current input including neutral current measurement
- Residual current measurement available
- 10-690Vac direct voltage input, fits all voltage rating system with one model
- RS-485 port built-in with Modbus-RTU and BACnet MS/TP, standard integration with most systems
- Standard Din-rail mount for ease-of-installation
- Compatible with both 50Hz and 60Hz systems
- Built-in energy pulse output and alarm output
- Optional relay output for alarm and remote control
- Tamper-proof design approved for revenue applications
AXM-WEB2 FOLC- Communication Module
- Daisy-chain Ethernet ports (RSTP Protocol)
- Fiber Optics LC Connector
- 802.3u Fast Ethernet 100Base-FX compatible
- Multimode Cable diameter 62.5/125 μm and 50/125 μm
- Maximum segment length of 2,000m
- 1310nm wavelength reduces signal loss and absorption
- Ethernet Port and WiFi channel
- Up to 2,000 meter distance from your meter to hub/switch
Acuvim IIBN – BACnet Power Meter
- Revenue Grade 0.2 class accuracy
- Built-in BACnet-IP Protocol for integration with BAS and other monitoring and control systems
- BTL Listed for Smart Sensor (B-SS) and BACnet Smart Actuator (B-SA)
- Built-in mobile-friendly web server for real-time meter reading and configuration
- Secure access to meter via HTTPs encrypted webpage