- AC+DC mixed or independent output mode for voltage DC offset simulation
- Built-in power meter capable of measuring 5 electrical parameters per phase
- Capable of setting output slope/phase angle, 0~359.9°
- Output frequency 15~1000Hz
- OCP/OVP/OPP/OTP/ Short circuit protection
- Multiple current measuring level selection
- Reverse Current Protection
- Programmable List, Pulse, Step mode
- Standard RS232/RS485/USB/LAN* (GBIP optional)
APM SPS Series – Three Phase AC Power Supply
APM’s SPS Series AC Source is a 3-phase programmable AC power supply with high power density. Featuring high speed DSP+CPLD control, high frequency PWM technology, and active PFC design, the SPS series is able to provide stable DC/AC output power, as well as 3-phase/1-phase output power. The touch screen allows for complete, easy operation from the front of the unit. The SPS Series is applicable in multiple testing applications including electrical, lighting, and aviation.
Description
Additional information
| Brand | APM |
|---|---|
| Output Power (Watts) | 1800, 3000, 4500, 6000, 9000, 12000, 15000 |
| Output Voltage (V) | 150/300 |
Related products
ITECH IT6800 Series – Programmable DC Power Supplies
IT6800 series programmable power supplies (18V-150V / 72W-216W) are small in size but have high power output, and 10mV, 10mA resolution, supports RS232 / GPIB / USB communication interface.
Buy Online
APM SP 2U Series – Programmable DC Power Supply
APM’s SP Series 2U programmable DC power supplies have many features including: high precision and resolution, 0.05 % voltage accuracy, 0.1 % current accuracy, 0.1 mV voltage resolution, 0.2 mA current resolution, high efficiency, low ripple and noise, and multiple communication interfaces, which allows for a more flexible and easy-to-use power supply.
APM SP 3U Series – Programmable DC Power Supply
APM’s high power, programmable DC power supply series adopts high frequency isolation and active PFC design, which allows the unit to achieve high efficiency at any output point. DSP and FPGA control circuits provide fast but stable internal data computing and response capability. The solar array simulation function provides a unique feature to mimic the output characteristics of a solar panel. An optional built-in electronic load feature enables the unit to function as a two-quadrant power supply. Integrated smart 3-stage charging algorithm simulation is suitable for the most common types of batteries on the market. Users can select standard automotive power network voltage curves to do the DUT performance test directly, according to the demand. List and Step modes can be used for auto sequence output. RS232, RS485 and USB communication interfaces are standard, while LAN & GPIB or CAN communication cards are optional.
ITECH IT7600 Series – High Performance Programmable AC Power Supplies
ITECH's IT7600 series high performance programmable AC power supplies, adopt advanced digital signal processing technology, with frequency up to 10-5000 Hz, built-in all-round power meter and large-screen oscilloscope function. Power up to 54 kVA and support master-slave parallel, which can provide high-capacity single-phase or three-phase AC output. The IT7600 has built-in arbitrary waveform generator functionality to simulate a variety of arbitrary waveform outputs; as well as strong exchange measurement and analysis functions.
Buy Online
ITECH IT6100 Series – Programmable DC Power Supplies
IT6100 series assure you accurate measurements with 0.1mV/0.1mA high resolution and high accuracy. With high-speed List mode output and voltage rise speed up to 20ms, it can independently edit and perform the default voltage waveform to meet the high-speed test needs. IT6100 series has built-in 5 1/2 digital voltmeter and milliohm meter, which can measure additional signals. IT6100 series supports SCPI communication protocol, GPIB/USB/RS232 interfaces are optional for customers.
Preen AFC Series – AC Power Sources
- Single phase power output from 0.5-150kVA and three-phase power output from 6-2000kVA
- CE mark with high electromagnetic compatibility performance
- High input power factory and high efficiency up to 92%
- Coupled with 4 LED displays to show measurements of voltage, current, frequency and power at once
ITECH IT-M3100 Series – Ultra-Compact Wide-Range DC Power Supplies
IT-M3100 series breaks through the traditional tech limits, in the ultra compact size of only 1U Half-Rack, the unit can not only output high power, but also has high performance and versatility. It supports the master-slave parallel mode. The full range of models support multiple stacking and parallel connection by handily designing "leg" plug-in. Fit with rack mount kit to achieve the perfect use.
Buy Online
ITECH IT6400 Series – Bipolar DC Power Supplies
The unique bipolar voltage/current output makes the IT6400 series a bipolar power source or a bipolar electronic load. The battery simulating function is especially applicable for development and high speed production testing of portable, battery-operated products. IT6400 has an ultrafast transient time, less than 20 μs and resolution up to 1 nA. Its new designed speed shift mode achieves voltage/current fast rising and without overshoot, the rising time up to 150μs. Mean while, the waveform display function let the test be visible an d simple. IT6400 series can be widely used in portable battery-operated products test, mobile power pack test, LED test and other fields.
Buy Online