Features
- Single output, 30 V/5 A , total power up to 150 W
- Low ripple and noise: <500 μVrms/3 mVpp; <2 mArms
- Excellent load and line regulation rate: <0.01% + 2 mV; <0.01% + 2 mA
- Transient response time: <50 μs 1 mV/1 mA resolution (optional)
- External trigger function supported, enabling synchronous output for multiple devices (optional)
- Timing option supports sweeps with minimum 10 ms dwell time
- 3.5-inch TFT-LCD
-
IIII [+] Read More
- Sound overvoltage/overcurrent/overtemperature protection, with response
time for the overvoltage protection less than 10 ms
- Front panel locking and any specified key locking supported
- RS232 interface communication supported
Applications
- R&D Iab General purpose testing
- Automotive electronic test
- Quality Assessment inspection
|
- Pure power for RF (radio frequency)/MW
(microwave) circuits or components
- Bias power for RF/MW circuits
- Device or circuit characterization and troubleshooting
|
Description
RIGOL’s DP700 series is an affordable programmable linear DC power supply for benchtop applications. With quality performance specifications, reliable output, and a small footprint, the DP700 series provides incredible benchtop value.
DP700 series supports timing output and trigger function, and provides a remote communication interface, enabling you to meet your diversified test requirements.
- Literature
- Specifications
| Model: DP711 Programmable Power Supplies |
| Display: |
3.5 Inch TFT Display |
| Load Regulation ± (output percentage + offset) |
| Voltage: |
< 0.01% + 2 mV |
| Current: |
<0.01% + 2 mA |
| Line Regulation ± (output percentage + offset) |
| Voltage: |
< 0.01% + 2 mV |
| Current: |
<0.01% + 2 mA |
| Ripple and Noise (20 Hz – 20 MHz) |
| Normal Mode Voltage: |
<500 μVrms/3 mVpp |
| Normal Mode Current: |
< 2 mA rms |
| Temperature Coefficient per ℃ (output percentage + offset) |
| Voltage: |
0.01% + 2 mV |
| Current: |
0.02% + 3 mA |
| Stability, ±(output percentage + offset) |
| Voltage: |
0.02% + 2 mV |
| Current: |
0.1% + 3 mA |
| OVP/OCP |
| Accuracy: |
0.5% + 0.5 V/0.5% + 0.5 A |
| Activation Time: |
<10 ms (OVP>1 V) |
| Temperature Coefficient[4], ±(% of Output + Offset) |
| Voltage: |
0.01% + 2 mV |
| Current: |
0.02% + 3 mA |
| Resolution |
| Programming |
| Voltage: |
10mV With high-resolution option: 1mV |
| Current: |
10 mA with
high resolution option installed: 1 mA |
| Read Back |
| Voltage: |
10mV With high-resolution option: 1mV |
| Current: |
10 mA with
high resolution option installed: 1 mA |
| Display |
| Voltage: |
10mV With high-resolution option: 1mV |
| Current: |
10 mA with
high resolution option installed: 1 mA |
| Accuracy 12 Months (25℃±5℃)±(output percentage + offset) |
| Programming |
| Voltage: |
0.05% + 20 mV |
| Current: |
0.2% + 10 mA |
| Read Back |
| Voltage: |
0.05% + 20 mV |
| Current: |
0.2% + 20 mA |
| Voltage Programming Control Speed (1% within the total variation range) |
| Rising |
| Full Load: |
150 ms |
| No Load: |
100 ms |
| Specifications |
| Power Voltage: |
100 Vac ± 10%, 120 Vac ± 10%, 220 Vac ± 10%, and 240 Vac ± 10% (max: 253 Vac) |
| Maximum Input Power: |
400 VA |
| Temperature Range: |
0°C to 40°C for full rated output, 5% to 80% RH |
| Storage Range: |
-40°C to 70°C, 5% to 80% RH |
| Interface Ports: |
RS232 |
| Dimensions: |
140 mm (W) x 202mm (H) x 332 mm (D) |
| Weight: |
Net weight: 6.9 kg |
|
