Showing 1–9 of 28 results

Conax BSWS Series – Bearing Sensor Wire Compression Seal Feedthrough

  • Stainless Steel Fitting
  • For Bearing Oil Sealing
  • Easy Installation – No “Potting”
  • Seals 2 to 14 Wires
  • Pressure*: to 50 PSI (3.4 bar)
  • Temperature Range: Ambient to 100°F (37.8°C)
  • Field Adjustable
  • Reusable Fitting

Conax EG Series – Power Compression Seal Feedthrough

  • Seals 1 Electrode or Element
  • For Gas or Non-Conductive Liquid
  • Stainless Steel Reusable Fitting
  • “Soft Sealant”
  • Electrode Easily Assembled or Replaced in Field

Conax EGT Series – Power Compression Seal Feedthrough

  • Electrode Teflon Sealing Gland
  • Seals 1 Electrode or Element
  • For Gas or Non-Conductive Liquid
  • Stainless Steel Reusable Fitting

Conax FCA Series – Fiber Cable Assembly

  • Transmission Loss: Less than 0.3db typical (not including connectors).
  • Temperature Rating: -4°F to +185°F (-20°C to +85°C). Higher temperature models are available in some configurations. Please consult factory.

Conax FSA Series – Fiber Optic Feedthrough

  • Helium Leak Rate: 1 x 10-6 scc/sec typical
  • Transmission Loss: Less than 0.3db typical (not including connectors)
  • Pressure Rating: 1000 PSIg (70 bar) standard, up to 3000 (207 bar) PSIg optional
  • Temperature Rating: -4°F to +185°F (-20°C to +85°C). Higher temperature models are available in some configurations. Please consult factory.

Conax HD Series – High Density Feedthrough Assemblies

  • Sheath Material: 300 Series SST, 4.5″ nominal length
  • Temperature Range: -112°F to +250°F (-80°C to +120°C)
  • Vacuum Rating: 5 x 10-6 mm HG @ 68°F (20°C)
  • Leak Rate: 1 x 10-9 scc/sec He @ 68°F (20°C), 1 atm. applied
  • Voltage Rating: 100 VDC
  • Amperage Rating: 500mA
  • Feedthrough Pressure Rating @ 68°F (20°C): 5000 psi (345 bar)

Conax HEGPK Series – Power Compressions Seal Feedthrough

  • Seals one electrode, conductor or element
  • Temperature Range: Vacuum to 7,700 PSIg (531 bar)
  • Voltage 8000 VDC
  • Amperage to 200 amps
  • Supplied with or without conductor

Conax HL Series – Hazardous Location Conduit Seal

  • Stainless Steel Fitting
  • For Gas or Liquid
  • Easy Installation -No “Potting”
  • Seals 1 to 12 Wires
  • Pressure*: Vacuum to 10,000 PSI (690 bar)
  • Rated: 600 Volts to 55 Amps

Conax HPEG Series – Power Compressions Seal Feedthrough

  • Each unit has a stepped electrode. Larger diameter of electrode is on the body side.
  • Electrode is copper (CU), stainless steel (SS) and nickel (NI)
  • Voltage rating 2000VDC
  • Body material is 316SS, ASTM 479
  • SST nuts and washers for NI and SS, brass for CU
  • All prices include a pressure test at 68°F