SEW® Standard Electric ST96 Series

96 X 96 mm DIN Panel Meters


SEW ST96 DIN Analog Meters

Characteristics :

  • Ideal for OEM applications
  • Case and Composition : Acrylic Resin front and bakelite case
  • Four Stud mounting.
  • Accuracy : Class 2.5
  • Class 2.5
  • Colour : Black case and white scale plate.
  • Pointer : Tube type, colour in red

Product Description:

The ST92 series is an OEM, low cost DIN meter, with an accuracy of 2.5% of full scale and a 90 ° arc. These meters are ideal for use in power engineering systems, power plants, switch and test rooms etc.
Specifications :
Scaling: Customized to any scaling desired, from linear to specialized Cos Ø, square root distributions, with color applications for visual emphasis and to any desired engineering units.
Specific accuracies
Basic Accuracy: ±2.5% of full scale, basic accuracy class.
Rectifier Type Meters: ±3 % of full scale basic accuracy class.
Repeatability: ±3% for Pivot and Jewell
Position of use: Vertical (scale) standardor to specified angle or position
Full scale deflection: 90 °
Movement: Pivot and Jewel
In this design the coil and pointer are
supported by polished steel pivots at each
end which fit into jewel bearings. Pivot and
jewel meters are recommended for high vibration
environments because of the
mechanism’s inherent stability and strength.
Accuracy and repeatability are almost equal
to the taut-band’s, and good performance
from the pivot and jewel construction is the
reason for its long popularity.
Case: Glass window ABS resin frame and case. Bakelite base mounting fitting included.Black base and frame, white scale plate and meter body
OverShoot: 20% Maximum
Size: 96 mm x 96 mm
Operating Temp.: 0 to 40°C (32 to 104°F)
Storage Temp: -10 to 50°C (14 to 50°F)
Relative Humidity: 95% (non condensing)