Texmate Model FL-B101Q
3/32 DIN, 101-Segment Bargraph Relay Meters>
Characteristics :
- 101 segment bargraph
- Bargraph center zero function.
- Four programmable setpoints.
- Relays activation can be selected to occur above (HI) or below
(LO) each setpoint. - Decimal point setting.
Product Description:
Smart mono-color digital bargraph
with four fully programmable set points for
monitoring, measurement, and control applications.
- Two 10 Amp Form C, and two 5 Amp Form A relays available
- Auto-sensing AC/DC power supply. For voltages between
85-265 V AC / 95-370 V DC (PS1) or 15-48 V AC / 10-72 V DC (PS2). - Optional isolated 16 bit analog output. User or factory scalable
to 4 to 20 mA, 0 to 20 mA or 0 to 10 V across any desired span
from ± one bar to the full scale range - Provision to connect an external programming lockout switch.
- Optional NEMA-4 front cover.
- 24 V DC excitation is available to power external 4/20 mA
transmitters and 5 or 10 V DC excitation is available for
resistance bridge type sensors
- More than 38 differentPlug-in I-Series Input Signal Conditioners are
approved for Texmate’s Leopard Family of meters.
Specifications :
| Display | |
| Bargraph: | 101 segment 4” vertical (std),horizontal (optn), red (std), green (optn), one red one green (opt) |
| Annunciators: | 4 red LEDs on front panel; one per setpoint. |
| Positive Overrange: | Bargraph and top segments of digital display flash. |
| Negative Overrange: | First segment of bargraph and bottom segments of digital display flash. |
| A/D Converter: | 14 bit single slope |
| Accuracy: | ±(0.05% of reading + 2 counts) |
| Temp. Coeff.: | 100 ppm/°C (Typical) |
| Warm up time:: | 2 minutes. |
| Conversion Rate: | 10 conversions per second (Typical) |
| Relay Output: | Two 5 Amp Form A relays and Two 10 Amp Form C relays |
| Analog Output : | Isolated 16 bit user scalable mA or V |
| OIC (mA out) | 4-20 mA @ 0 to 500Ω max loop resistance |
| OIV (volts out) | 0-10 V DC @ 500 Ω or higher resistance |
| Power Supply: | AC/DC Auto sensing wide range supply |
| PS1 (std): | 85-265 VAC / 95-370 VDC @ 2.5W max 4.2W |
| PS2 | 15-48 VAC / 10-72 VDC @ 2.5W max 4.2W |
|
General:
|
|
| Operating Temp.: | 0 to 60 °C |
| Storage Temp: | –20 °C to 70 °C. |
| Relative Humidity: | 95% (non condensing) |
| Case Dimensions: | 3/32 DIN, Bezel: 36×144 mm(1.42”x5.69”)Depth behind bezel: (4.64″) 117.5 mm Plus 10 mm (0.39”) for Right-angled connector, or plus 18.3 mm (0.72”) for Straight-thru connector, or plus 26.5 mm (1.05”) for Push-On connector. |
| Weight: | 9.5 oz., 12 oz when packed |
.jpg){kind=small}