• YOKOGAWA

UP35A {1/4 DIN}
Advanced Programmable Controllers with Alarms

Designed for demanding applications
Rugged, reliable, high accuracy, feature loaded)

Yokogawa UP35A programmable Controllers
[+] Click image for more pictures |||||||||| [+] Click here for specifications |||||||||| Request For Quotation

Features

  • Up to 4 program patterns
  • 4 target setpoints (PID numbers) available as standard
  • 2 PV events, 4 time events, and 2 alarms can be
    monitored simultaneously
  • 3 alarm independent common terminals available as standard
  • Up to 8 DIs and 8 DOs (combinations available)
  • Display:
    • A 14-segment, active (PV display color changing function) color LCD display is employed.
    • Two five-digit, high-resolution displays
    • Ladder Sequence Control
    • Fuzzy Logic Control
  • Control:
    • — 8 Built-in Control Modes
    • — 8 Built-in Control Types
    • Ladder Sequence Control
    • Fuzzy Logic Control
IIII [+] More Features
  • Simple operation:
    • Auto-tunning
    • Scrolling Text
    • Navigation Guide & Navigation Keys
    • Programmable Function Keys
    • User Settable Default Values
    • Compact Design
  • Communications
    • Modbus, Peer to peer
    • PC-Link & Ladder protocols and coordinated operation
    • Ethernet, RS-485, PROFIBUS-DP, CC-Link

Applications

  • Measurement, display, and control of temperature, pressure, and flow rate
  • Research and development facilities and manufacturing operations
    (heat treatment, washing, sterilizing, etc.)
  • Critical heating and cooling control

Description

The UP35A program controller employs an easy-to-read, 14-segment large color LCD display, along with navigation keys, greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard.

The UP35A is a versatile and well equipped controller with a convenient fast-forwarding of program operation, used to check the program pattern settings and the program pattern-2 retransmission serves as a program pattern generator. The ladder sequence control function can replace a PLC required by the application. The Sequence control and PID control can be performed
simultaneously in monitoring and controlling external machinery such as Lamps, switches, timers and easily solve digital input / output logic functionality.

IIII [+] Read More

It is quick and easy to assign frequently used functions, such as the operation mode switch, Run/Stop, program pattern selection, Remote/Local, alarm latch release, and PID parameter display.
This full featured, reliable
program controller is ideal for the most demanding applications, all you need in a small package.

UT Advanced digital indicating controllers come standard with a sequence control function based on the ladder logic programming language, which is widely used by engineers. This product series
improves design efficiency and reduces costs by eliminating the need for relays and other types of peripheral devices.

 
  • Literature
  • General Specifications
  • Accessories
Literature and Technical Information
pdf icon

Panel Instrumentation
++ UP35A Series | Brochure (4.8 kB)
++ UP35A Series | General Specification sheet (958 kB)
++ UP35A Series| Manual (10.6 MB)
++ UP35A Series| Operation Manual (10.2 MB)
++ UP35A Series| RS485 Communications (6.7 MB)
++ UP35A Series| open Source Communications (5.6 MB)
Software
Software
++ Literature – LL50A – Parameter setting tool (11.4 MB)
++ Literature – LL50A – Parameter Setting & Ladder Program Building Function (688 kB)
++ Literature – LL50A – Parameter Setting Software Installation Manual (3.9 MB)
Model: Yokogawa UP35A advanced Programmable controllers
 
PV/SP Data display: 5 digits / 5 digits with LCD display
PV inputs: 1 Universal input (TC, RTD, mV, V, mA)
Control
Auxiliary Analog Input: 1 for secondary PV
Control scan period: 200 msec
Control loops: 1 or 2(cascade, dual)*****
Control Modes: PRG/RESET, LOCAL, HOLD, ADVANCE8888
Program Pattern: 2 (Std) 4 (Max)
Number of Patterns: 20 (Std) 40 (Max)
Number of Segments/ Pattern: 10
Number of (PV) Events/Segment: 2
Number of Time Events/Segment: 4
Number PID Sets: 8
Current trans input (option): 2
Ladder Sequence Function (Number of max. steps) 500
Control Algorithms: ON/OFF, 3 position, PID(Continuous,Time-proportional), Heating & Cooling
Control Computation: Continuous PID control, Time-proportional PID control, Relay ON/OFF control, Heating/Cooling control, Target setpoint , PID parameter, Auto-tuning, "SUPER" function, "SUPER2" function, Preset output function and Control cycle time
Operation Mode switching: Start of program operation (PROG)
Stop of program operation (RESET)
Start of local-mode operation (LOCAL)
Start of remote-mode operation (REM)
Pause/cancel release of program operation (HOLD)
Advance of segment (ADV)
Automatic (AUTO)/Manual (MAN) switching
Local (LSP)/CAS switching when in cascade control
Parameters: Segment PID
(Measured input zone, PID, Target setpoint zone, PID, Reached target setpoint zone, PID Local, PID Reference deviation) Proportional band, Integral time, Derivative time, ON/OFF control hysteresis
(one or two hysteresis points), Preset output value, Output limiter, Rate of change limiter of output, Dead band of heating/cooling control, Dead band of position-proportional control,
Shutdown function
Analog Inputs
Standard (Max.) 1(Std) 4(Max)
Analog Outputs
Control output: 1
Cooling Side control output: 1
Digital Outputs
Control Outputs (MV) Select from 2 sets of Relays, Voltage Pulses or 4 to 20mA
Standard (Max.) 3(Std) 8(Max)
Digital Inputs
Number: 8(Std) 9(Max)
Current Transformer Inputs
Number: 1
Retransmission
Number: 1
Type: PV, SP, OUT, etc
Loop power supply
Number: 1 point
Type: 21.6 to 28.0 VDC
Communication
Number: 1 or 2
Type: RS-485, Ethernet, PROFIBUS-DP, CC-Link, DeviceNet
Environment
Front Protection: IP55
Power supply: Rated voltage 100 to 240V AC, (±10%), 50/60Hz
Power consumption: Max 20 VA
General Approvals UL, CE, CSA
Power Supply Consumption: 90 to 264 V AC, max. 20VA
Operating Temperature: 0 to 50°C ( 40°C or less in close
mounting side-by-side)
Relative Humidity: 20 to 90% (non condensing)
Storage Temperature: -25 to 70°C
Dimensions: 96W×96H×100D (From the front panel
surface) (mm)
Mounting: Direct panel mounting; mounting bracket, one each for upper and lower mounting
Weight: 0.5 kg
ACCESSORIES

PC-based Setup Parameters & Custom Computation Building Tools

For UTAdvanced Series Controllers
 
LL50A Parameter Setting Software

The LL50A Parameters Setting Software is designed to build and set parameters, ladder programs, and the like of the UTAdvanced digital indicating
controllers from a PC. The tuning and monitoring of ladder programs are possible during communication with the controllers.

  • Parameter Setting Function
  • Tuning Function
  • Ladder Program Building Function
  • Network Profile Creating Function
LL200 connection image

Parameter Setting Display

This function is used to set the parameters of the main unit. There are setup parameters for setting the basic functions of a main unit controller and operation parameters used for setting functions necessary to operate the main unit. It is also possible to set them using the Setting wizard.

Proper management of the setting file minimizes the downtime during maintenance and inspection.

Program pattern setting function

This function is used to set the program pattern of the UP55A/UP52A

Monitoring Functionality

Tuning/change:

With the PC connected to one controller, the tuning function tunes PID parameters by displaying PV input values (PV), target setpoints (SP), control output values (OUT), etc. on the PC screen. Furthermore, it also enables the PV, SP, and OUT values to be displayed as trend data and acquired together with the loop information and fixed registers in the Tuning window. Acquired trend data can be saved in a file of .csv format.

Monitoring/changing register

The register monitoring function enables the main unit’s registers to be monitored and/or changed during ladder program debugging.

Upload/download/comparison function

This function downloads parameter data, program pattern data and/or ladder program data to the main unit, uploads it from the main unit, and compares it with the main unit data. You can specify all data, or individual data items, to be uploaded or downloaded.

File management/print function

This function enables you to save created parameter data, program pattern data and/or ladder program data in a file. It also allows data to be printed out for submission to the customer.

Ladder program building function

In ladder programs, there are various computations for input and output signals, and sequence processing can be built using four fundamental arithmetic operations, logical operation, temperature compensation factor calculation, and pressure compensation factor calculation and between input and output contacts.

Configuration of ladder program

A ladder program consists of three parts: the input ladder calculation executed before control computation, and the output ladder calculation and the user ladder calculation performed after control computation. Each calculation section is respectively executed every control period. The sequence of calculation is: input, input ladder calculation, control computation, output ladder calculation, user ladder calculation, and output.

Building a ladder program:

A ladder program is built by editing the default ladder programs provided for each control mode of system data.
It is recommended that the user ladder calculation section be used if a sequence is desired to be configured regardless of controller control computation. As the initial status, the default ladder programs are described in the input ladder calculation and output ladder calculation sections on a control mode basis. No program is written in the user ladder calculation section.