Features

• Switchable two clock ranges
  620.0 to 720.0MHz
  155.0 to 180.0MHz
• Synchronize with external equipment
  10MHz reference Input/Output

Description

The AQ2200-651 Signal Generator module reduces the complexity and cost of 10G optical transceiver testing by combining Signal Generation functions into the same mainframe that provides bus and power control while performing BERT and Optical testing. This allows a single programming interface to control all aspects of the transceiver test, simplifying test setup, decreasing test time and increasing productivity. The wiring complexity and test bench size are reduced by replacing up to 5 Signal Generators with a single module.

Literature Specifications Literature and Technical Information Optical Switch Modules ++ AQ2200 Series Modules Brochure | 2.6 MB ++ AQ2200 Series Specification Brochure | 656 kB ++ AQ2200 Series Operation Guide | 4.2 MB ++ AQ2200 Series User’s Manual | 5.2 MB SG Module (AQ2200-651) Model Specifications RF OUT (CH1-CH5): Frequency range: 620.0 to 720.0 MHz (when the rate is 1/1) 155.0 to 180.0 MHz (when the rate is 1/4) Frequency resolution: 1 Hz Frequency accuracy ±2.0 ppm (when using the internal oscillator) Depends on the signal received by 10 MHz REF IN (when using an external reference signal Output: Amplitude: 0.8 Vp-p ± 0.2 Vp-p, 1.3 Vp-p ± 0.2 Vp-p Waveform: Rectangular Duty: 50% ± 10% Terminator Ccondition: 50 Ω AC-coupling Connector: SMA, female 10MHz REF IN: Input: Frequency range: 10 MHz ± 2.0 ppm Amplitude: 0.3 Vp-p to 1.2 Vp-p Duty: 50% ± 10% Absolute max. rating: 1.5 Vp-p Terminator Ccondition: 50 Ω AC-coupling Connector: SMA, female 10MHz REF OUT: Output: Frequency range: 10 MHz ± 2.0 ppm (when using the internal oscillator) Depends on the signal received by 10 MHz REF IN (when using an external reference signal) Amplitude: 0.8 Vp-p ± 0.2 Vp-p Terminator Ccondition: 50 Ω AC-coupling Connector: SMA, female Specifications Dimensions: Approx. 31(W)×117(H)×321.5(D)mm, 1slot wide Weight: Approx. 0.9 kg