Yokogawa AQ2160-01 Fiber Optical Power Meter

Yokogawa  AQ2160-01 Optical Power Meter



  • Operation with only three keys — Power, Wavelength Selection
    and Backlight
  • Compact and lightweight
    Approximately70 (W) x 150 (H) x 32 (D) mm260 g
  • Two way power supply available
    Two AA dry cells or AC adapter (optional)
  • Can be operated under battery power for long periods of time
    Approximately 40 hours (when using alkali cells)
  • Backlight allows operation in dimly lit work areas
    Illuminates for approximately 5 seconds when an operation key (on the panel) is pressed
  • Includes accessories for easy portability
    Neck strap
    Carrying pouch
  • Select options according to your application
    AC adapter and protector


  • Installation of optical LANs and Home networks
  • Maintenance of FTTH
    networks to LANs.

Product Description:

The AQ2160-01 designed for installation and maintenance of fiber optic LANs and home networks, as well as for general purpose optical measurements. With its hand-held size and weight of approximately 270 g, the AQ2160-01 can be used anywhere. A convenient neck-strap and back light are also available.



Sensor performance
Wavelength settings 850, 1310 and 1550 nm
Reference wavelength 1310 nm
Light-receiving element InGaAs (1 mm )
Use Light emitted from SM (9/125 m), GI (50/125 m) or GI (62.5/125 m) optical fiber
Input type SC or FC connector(selectable as a factory-set option)
Power range –70 to +5 dBm
Noise level –60 dBm
Accuracy 5%
Power Meter performance and functions
Display 7 segments, 4 digits, back light
Displayed unit dBm (absolute value)
Range switching Automatic
Measurement mode CW light
Measurement interval Approximately 330 ms
Display resolution 0.01 (≥ –60 dBm), 0.1 (< –60 dBm)
Backlight Turns on while backlight key is pressed, and stays on for approximately 5 seconds after backlight key is pressed.
Power saving The powermeter turns off automatically (or can be functionally disabled) when there is no key operation for approximately 10 minutes.
Battery check Low-battery indicator
Resume function Resumes operation with settings which were active at immediately preceding power-off
Power supply Two AA batteries (alkaline dry cells or nickel metal-hydride rechargeable batteries) or optional AC adapter
Battery life Approximately 40 hours (as measured using alkaline dry cells. at 25°C with CW light input)
Environmental conditions Operating temperature range: 0°C to +50°CStorage temperature range: –25°C to +70°C Relative humidity: 80% or less (no condensation)
Weatherproofing Conforms to JIS C 0920 weatherproofing TYPE I
Dimensions and weight 70 (W) × 152 (H) × 32 (D) mmApproximately 250 grams
Included accessories Two alkaline dry cells, neck strap, carrying pouch, user’s manual
Option AC adapter
  • Related Products
  • Product Categories
  • Options

  • Digital transmission test instruments10 Gbit/s BERT module, E/O modules, O/E modules
  • Optical sourcesLD light sources, Fabry-Perot LD modules, DFB-LD module, Tunable laser source module, White light source
  • Optical power metersOptical powermeters, Sensor modules, Sensor heads, High resolution reflect meter for return loss measurement
  • OTDR
  • Optical time domain reflectometers
  • Optical spectrum analysis products
  • Optical spectrum analyzers
  • Display testerDisplay tester for luminance, contrast, flicker and chromaticity measurements.
  • Optical attenuators, switches and othersOptical attenuators, Optical attenuator modules, Optical switch
  • PlatformsMulti-application Test system
  • Optical sensing productsFBG sensor monitor, Optical fiber strain analyzer
  • Optical Transport AnalyzersMeasure the
    transmission and reception of communication frames, alarm/error characteristics,
    and the transmission characteristics

Product Model Specifications
Holster SU2007A
AC adapter SU2007A-C UL/CSA standard type (UL2P) AC adapter
Carrying case SU2006A

pdf_pic Downloads: Specifications
web index mail